The Chelsea 541 Series Power Take-Off Assembly, part number 541-LAT-A-XV or 541LATAXV, mounts on the rear countershaft of Eaton Fuller transmissions, including Advantage and UltraShift models equipped with a Thrushaft opening. This unit uses a lever/mechanical shift and delivers output through a 1-1/2"-10T spline with a 1410 Series companion flange. Intermittent torque capacity reaches 400 lb-ft (check application pages for actual ratings). Shaft power is rated at 38 HP at 500 RPM and 76 HP at 1000 RPM. The rear-mount design frees up space under the vehicle for pump or driveline plumbing. Only three fasteners are required for installation, with no backlash adjustment needed. Call us to confirm proper fit for your application.
Features
Rear-mount design for Eaton Fuller transmissions with Thrushaft opening, including Advantage and UltraShift Series
Lever/mechanical shift operation
1-1/2"-10T spline output with 1410 Series companion flange
Intermittent torque capacity up to 400 lb-ft / 542 Nm (verify on application pages)
Shaft power: 38 HP at 500 RPM, 76 HP at 1000 RPM
Three-fastener installation with no backlash adjustment required
Tech Specs
- Transmission Manufacturer: Eaton/Fuller (Advantage and UltraShift compatible)
- Mounting Type: Rear Mount
- Shift Type: Lever, Mechanical
- Output Shaft Type: 1-1/2"-10T Spline with 1410 Series Companion Flange
- Intermittent Torque: 301-400 lb-ft / 501+ Nm; 400 lb-ft / 542 Nm (Check Application Pages for Actual Torque Ratings)
- Output Power: 56+ HP / 51+ kW
- Shaft Power: 38 HP at 500 RPM, 76 HP at 1000 RPM / 28 kW at 500 RPM, 57 kW at 1000 RPM
- Continuous Operation: Yes, with 30% de-rating
Additional Information
Parts Manual: Chelsea 541 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
