The Chelsea 541 Series Power Take-Off Assembly, part number 541-LBJAXV or 541LBJAXV, mounts on the rear countershaft of Eaton Fuller transmissions, including the Advantage and UltraShift Series. This unit uses Chelsea's Thrushaft design, which requires only three fasteners for installation with no backlash adjustment needed. The output shaft is a 1-1/2"-10T spline with a 1410 companion flange, suited for driveline connections. Shift is lever/mechanical. Intermittent torque capacity reaches up to 400 lb-ft (check application pages for actual ratings). Output power is rated at 56+ HP, with shaft power of 38 HP at 500 RPM and 76 HP at 1,000 RPM. The rear-mount design keeps space clear under the vehicle for pump or driveline installation. A genuine Chelsea part, available through Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Mounts to rear countershaft of Eaton Fuller transmissions, including Advantage and UltraShift Series
Thrushaft design installs with three fasteners, no backlash setting required
Lever/mechanical shift type
1-1/2"-10T spline output with 1410 Series companion flange
Intermittent torque up to 400 lb-ft, 542 Nm (verify actual ratings on application pages)
Rear mount layout provides additional clearance at the back of the transmission for pump or driveline installations
Tech Specs
- Transmission Manufacturer: Eaton/Fuller (Advantage and UltraShift Series compatible)
- Intermittent Torque: 301-400 lb-ft / 501+ Nm; 400 lb-ft / 542 Nm (Check Application Pages for Actual Torque Ratings)
- Output Power: 56+ HP / 51+ kW
- Output Shaft Type: 1-1/2"-10T Spline with 1410 Series Companion Flange
- Shift Type: Lever, Mechanical
- Mounting Type: Rear Mount
- Shaft Power: 38 HP / 28 kW at 500 RPM; 76 HP / 57 kW at 1,000 RPM
Additional Information
