The Chelsea 221XCAJX-W3XD or 221XCAJXW3XD is a 6-bolt Power Take-Off assembly from the Chelsea 221 Series, built for low-speed, heavy-duty vocational applications including dump trucks, tow and recovery, and aerial equipment. It mounts to transmissions from Allison, Eaton/Fuller, Volvo/Mack, Hino, and other manufacturers. The wire/cable mechanical shift and 1-1/4" round output shaft with keyway suit a wide range of hydraulic pump setups. Intermittent torque capacity reaches 250 lb-ft (339 Nm); verify actual ratings on the Chelsea application pages for your specific configuration. The cast iron housing accepts either a standard or low-profile cover, and greaseable pump shafts resist spline fretting and corrosion. Call us to confirm proper fit for your transmission and application.
Features
6-bolt mounting for compatibility with Allison, Eaton/Fuller, Volvo/Mack, Hino, and other transmission manufacturers
Wire/cable mechanical shift operation
1-1/4" round output shaft with keyway
Intermittent torque rating up to 250 lb-ft (339 Nm) - confirm actual rating for your application
Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
Greaseable pump shafts to reduce spline fretting and corrosion; available in standard or low-profile housing
Tech Specs
- Intermittent Torque: 250 lb-ft / 339 Nm (Check Application Pages for Actual Torque Ratings)
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP / 31-40 kW
- Output Shaft Type: 1-1/4" Round with Key
- Transmission Manufacturer: Allison, Eaton/Fuller, Volvo/Mack, Hino, Other
- Mounting Type: 6-Bolt
- Shaft Power: 24 HP (500 RPM), 48 HP (1000 RPM) / 18 kW (500 RPM), 36 kW (1000 RPM)
- Continuous Operation: Yes, with 30% de-rating
Additional Information
