The Chelsea 221 Series Power Take-Off, part number 221XEAJP-W3RD or 221XEAJPW3RD, is a 6-bolt, wire/cable mechanically shifted PTO built for low-speed, heavy-duty vocational work. Output is delivered through a 1-1/4" round shaft with key, rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. Intermittent torque is rated in the 201-300 lb-ft range (check application pages for the specific torque value applicable to your installation). The cast iron housing supports tapered cone output bearings for strong radial load capacity. Compatible transmissions include Allison, Eaton/Fuller, Volvo/Mack, Hino, and others. A low-profile housing option is available within this series. Call us to confirm proper fit for your application.
Features
6-bolt mounting configuration compatible with Allison, Eaton/Fuller, Volvo/Mack, Hino, and other transmission housings
Wire/cable mechanical shift operation
1-1/4" round output shaft with key
Shaft power rated at 24 HP (500 RPM) and 48 HP (1,000 RPM)
Greaseable pump shafts to reduce spline fretting and corrosion
Cast iron housing with tapered cone output bearings for heavy radial loads
Tech Specs
- Intermittent Torque: 201-300 lb-ft (339 Nm range) - check application pages for actual torque rating
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP (31-40 kW)
- Output Shaft Type: 1-1/4" Round with key
- Mounting Type: 6-Bolt
- Compatible Transmissions: Allison, Eaton/Fuller, Volvo/Mack, Hino, Other
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM (18 kW at 500 RPM, 36 kW at 1,000 RPM)
Additional Information
