The Chelsea 880XMAHX-P3AF or 880XMAHXP3AF is an 880 Series Power Take-Off assembly built for heavy-duty, high-torque applications. It mounts to transmissions with an 8-bolt aperture, including Eaton/Fuller, Volvo/Mack, and Allison models. Shift type is lever mechanical, with an optional air control shift also available in the series. The output shaft is a 1-1/2"-10T spline with a 1410 companion flange. Intermittent torque rating for the 880 Series reaches 500 lb-ft (678 Nm); check application pages for the actual rating of your specific configuration. Shaft power in this series runs 48 HP at 500 RPM and 95 HP at 1000 RPM. Typical uses include bulk haulers, fire trucks, oil field equipment, aerial units, and large recovery trucks. Call us to confirm proper fit for your application.
Features
8-bolt mounting fits most manual transmissions including Eaton/Fuller, Volvo/Mack, and Allison
Lever mechanical shift standard; optional air control shift available in the 880 Series
1-1/2"-10T spline output shaft with 1410 companion flange
Intermittent torque capacity up to 500 lb-ft (678 Nm) for the 880 Series; verify actual rating for your configuration
Dual-pump output allows a hydraulic pump to be mounted on each end of the PTO
Removable shift cover simplifies backlash adjustment during installation
Tech Specs
- INTERMITTENT TORQUE: 401-500 lb-ft / 501+ Nm; 500 lb-ft / 678 Nm (Check Application Pages for Actual Torque Ratings)
- TRANSMISSION MANUFACTURER: Volvo/Mack, Allison, Eaton/Fuller, Other
- SHIFT TYPE: Lever Mechanical
- OUTPUT POWER: 56+ HP / 51+ kW
- OUTPUT SHAFT TYPE: 1-1/2"-10T Spline with 1410 Companion Flange
- MOUNTING TYPE: 8-Bolt
- SHAFT POWER: 48 HP (500 RPM), 95 HP (1000 RPM) / 36 kW (500 RPM), 71 kW (1000 RPM)
Additional Information
