The Dana Spicer 805359-3024 or 8053593024 is a Series 1710 drive shaft assembly built around a 4.00 x .134 in. (101.5 x 3.4 mm) steel tube with a tube length of 30.75 in. (781.05 mm). Center-line-to-center-line collapsed length measures 44.75 in. (1136.65 mm); installed length is 46.69 in. (1185.95 mm). Maximum slip travel is 3.88 in. (98.6 mm). The assembly ships with 2 universal joints included, phasing is 0 degrees (non-phased), and the joint angle is rated at 22 degrees. Available in both unwelded and welded assembly configurations. A genuine Dana Spicer part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Series 1710 heavy-duty drive shaft
4.00 x .134 in. (101.5 x 3.4 mm) steel tube, 30.75 in. tube length
Collapsed CL-to-CL length: 44.75 in. (1136.65 mm); installed: 46.69 in. (1185.95 mm)
Maximum slip: 3.88 in. (98.6 mm)
2 universal joints included, non-phased (0 degrees), 22-degree joint angle
Available in unwelded and welded assembly configurations
Tech Specs
- Series: 1710
- Shaft Material: Steel
- Tube Size: 4.00 x .134 in. (101.5 x 3.4 mm)
- Tube Length: 30.75 in. (781.05 mm)
- CL Yoke to CL Yoke - Collapsed: 44.75 in. (1136.65 mm)
- CL Yoke to CL Yoke - Installed: 46.69 in. (1185.95 mm)
- Max Slip: 3.88 in. (98.6 mm)
- Mid Slip: 1.94 in. (49.3 mm)
- No. of Universal Joints Included: 2
- Joint Angle: 22 degrees
- Phased: No (0 degrees)
- Assembly: Unwelded and Welded
