The Dana Spicer SPL170 series driveshaft, part number 170DS55004C-1420M or 170DS55004C1420M, is a welded steel assembly built for heavy-duty driveline service. The steel tube measures 4.96 inches in diameter with a 0.118-inch wall thickness and a tube length of 55.91 inches (1,420 mm). Installed centerline-to-centerline yoke distance is 72.68 inches (1,846 mm); collapsed distance is 70.51 inches (1,791 mm). Maximum slip is 4.33 inches (110 mm) and mid-slip is 2.17 inches (55 mm). The assembly operates at up to a 25-degree joint angle and includes two universal joints. Phasing is standard (0 degrees). Available from Pro Gear and Transmission - call us to confirm proper fit for your application.
Features
Dana Spicer SPL170 series, welded steel driveshaft assembly
Tube diameter 4.96 in. (126.0 mm) with 0.118 in. wall thickness
Tube length 55.91 in. (1,420 mm)
Installed C/L-to-C/L yoke distance 72.68 in. (1,846 mm); collapsed 70.51 in. (1,791 mm)
Maximum slip 4.33 in. (110 mm); mid-slip 2.17 in. (55 mm)
Includes 2 universal joints; 25-degree joint angle; standard (non-phased) configuration
Tech Specs
- Series SPL170
- Shaft Material Steel
- Tube Size 4.96 in. x 0.118 in. wall (126.0 mm x 3.00 mm)
- Tube Length 55.91 in. (1,420.0 mm)
- Max Slip 4.33 in. (110.0 mm)
- Mid Slip 2.17 in. (55.0 mm)
- C/L Yoke to C/L Yoke - Collapsed 70.51 in. (1,791.0 mm)
- C/L Yoke to C/L Yoke - Installed 72.68 in. (1,846.0 mm)
- Joint Angle 25 degrees
- Universal Joints Included Yes - 2
- Phased No (0 degrees)
- Assembly Type Welded
- VMRS Code 024000000
