The Dana Spicer SPL250 series driveshaft, part number 250DS55003C-1150M or 250DS55003C1150M, is a welded steel assembly built to heavy-duty driveline standards. The steel tube measures 5.12 inches in diameter with a .197-inch wall thickness and a tube length of 45.28 inches (1,150 mm). Center-line yoke to center-line yoke spans 60.28 inches collapsed and 62.44 inches installed. Maximum slip is 4.33 inches, mid-slip is 2.17 inches, and the assembly accommodates a joint angle up to 25 degrees. Two universal joints are included. The shaft is non-phased. Call us to confirm proper fit for your application.
Features
SPL250 series driveline designation
Welded steel tube: 5.12 in. diameter x .197 in. wall (130.0 x 5.00 mm)
Tube length: 45.28 in. (1,150.0 mm)
Center-line yoke to center-line yoke: 60.28 in. collapsed / 62.44 in. installed
Maximum slip: 4.33 in. (110.0 mm); mid-slip: 2.17 in. (55.0 mm)
Joint angle: 25 degrees; 2 universal joints included, non-phased assembly
Tech Specs
- Series SPL250
- Shaft Material Steel
- Tube Size 5.12 in. x .197 in. (130.0 x 5.00 mm)
- Tube Length 45.28 in. (1,150.0 mm)
- Max Slip 4.33 in. (110.0 mm)
- Mid Slip 2.17 in. (55.0 mm)
- CL Yoke to CL Yoke - Collapsed 60.28 in. (1,531.0 mm)
- CL Yoke to CL Yoke - Installed 62.44 in. (1,586.0 mm)
- Joint Angle 25 degrees
- Phased No
- Phased Degrees 0
- Assembly Welded
- Universal Joints Included Yes
- Number of Universal Joints 2
- VMRS 024000000
