The Dana Spicer 2023480 is a complete SVL rear axle shaft assembly for the GM 9.5 rear axle. It measures 34.020 inches (864.108 mm) in length and carries 33 inboard splines, making it specific to semi-floating rear axle configurations. The wheel flange is drilled for a 6-lug, 6 x 5.50-inch bolt pattern with a 0.600-inch wheel stud hole diameter. The brake pilot diameter is 3.087 inches and the bearing pilot diameter is 1.619 inches. The unit ships as a complete shaft assembly without ABS sensor ring, bearing, seal, retainer ring, wheel studs, or nuts - confirm these components are already on hand before installation. Call us to verify proper fit for your specific application.
Features
GM 9.5 rear axle application, semi-floating design
33 inboard splines
Shaft length: 34.020 in. (864.108 mm)
6-lug wheel flange, 6 x 5.50 in. bolt pattern, 0.600 in. stud hole diameter
Brake pilot diameter: 3.087 in. / Bearing pilot diameter: 1.619 in.
Complete shaft assembly, Non-ABS, no sensor ring, bearing, or seal included
Tech Specs
- Axle Model: GM 9.5
- Material: Steel
- Location: Rear
- Axle Type: Complete Assembly
- Float Type: Semi-Floating
- Shaft Length: 34.020 in. (864.108 mm)
- Spline Count: 33 Inboard
- Bolt Pattern: 6 x 5.50 in.
- Number of Wheel Lugs: 6
- Wheel Stud Hole Diameter: 0.600 in.
- Brake Pilot Diameter: 3.087 in.
- Bearing Pilot Diameter: 1.619 in.
- Cover Bolt Hole Quantity: 14
- ABS Sensor Ring: Not Included
- Bearing Included: No
- Seal Included: No
- Retainer Ring Included: No
- Wheel Studs Included: No
- Wheel Nuts Included: No
- U-Joint Included: No
