The Eaton Detroit Locker differential install kit K-GM8.2-72BOP or KGM8272BOP is engineered specifically for the GM 8.2 in. BOP rear axle. This kit covers the critical hardware needed during a differential installation, including Timken carrier bearings, carrier shims, pinion shims, pinion seal, pinion nut, crush sleeve, ring gear bolts, tail bearing, head bearing, thread locking compound, RTV gasket maker, and gear marking compound. The ring gear uses a 10-bolt pattern with standard rotation, and the pinion carries a 27-spline count while the axle runs 28 splines. Note that axle bearings, axle seals, and a cover gasket are not included. Also referenced as Eaton part 19674-010. Call us to confirm proper fit for your application.
Features
GM 8.2 in. BOP rear axle application
Timken carrier bearings included
27-spline pinion, 28-spline axle
10-bolt ring gear pattern, standard rotation
Includes carrier shims, pinion shims, crush sleeve, tail bearing, head bearing, pinion seal, pinion nut, ring gear bolts, thread locking compound, gear marking compound, and RTV gasket maker
Axle bearings, axle seals, and cover gasket are NOT included
Tech Specs
- Axle Description: GM 8.2 in. BOP
- Axle Location: Rear
- Pinion Spline Count: 27
- Axle Spline Count: 28
- Ring Gear Bolts: 10
- Cover Bolts: 10
- Ring Gear Rotation: Standard
- Bearing Brand: Timken
- Carrier Bearings Included: Yes
- Head Bearing Included: Yes
- Tail Bearing Included: Yes
- Axle Bearings Included: No
- Carrier Shims Included: Yes
- Pinion Shims Included: Yes
- Pinion Seal Included: Yes
- Pinion Nut Included: Yes
- Crush Sleeve Included: Yes
- Ring Gear Bolts Included: Yes
- Cover Gasket Included: No
- Axle Seals Included: No
- Thread Locking Compound: Yes
- Gear Marking Compound: Yes
- RTV Gasket Maker: Yes
- Also Referenced As (Eaton): 19674-010
