The Muncie A20-A1010-HR3PBPX or A20A1010HR3PBPX is a medium-duty, 10-bolt clutch shift power take-off engineered for Allison 3000 and 4000 Series transmissions. The shift cover rotates 360 degrees for flexible installation positioning, and the rotatable pump flange accommodates a variety of hydraulic setups without special adapters. Tapered roller bearings extend service life, and the increased-diameter output shaft handles higher drive loads. Gear geometry is optimized to reduce operating noise, and the design incorporates fewer leak paths than earlier generations. Three housing arrangements are available, and the unit accepts the Muncie EX Drive shaft extension. Call us to confirm the right configuration for your application.
Features
10-bolt clutch shift PTO for Allison 3000 and 4000 Series transmissions
Shift cover allows 360-degree rotation for flexible mounting orientation
Rotatable pump flange simplifies hydraulic plumbing at installation
Tapered roller bearings extend PTO service life
Increased output shaft diameter for higher drive load capacity
Compatible with Muncie EX Drive shaft extension
Additional Information
| SPEED | 3000 SERIES | 4000 SERIES | INTERMITTENT CONTINUOUS HP (KW) | INTERMITTENT/CONTINOUS |
| RATIO | ENGINE % | ENGINE % | HP (KW) @ 1,000 RPM | TORQUE LBS.FT. (NM) |
| 5 | 74% | 105% | 77 (57) | 400 (542) |
| 6 | 85% | 122% | 77 (57) | 400 (542) |
| 7 | 99% | 141% | 79 (59) | 415 (563) |
| 8 | 114% | 163% | 69 (51) | 360 (488) |
| 9 | 122% | 175% | 65 (48) | 340 (461) |
| 10 | 131% | 187% | 59 (44) | 310 (420) |
| 11 | 151% | 215% | 52 (39) | 275 (373) |
| 12 | 162% | 231% | 50 (37) | 265 (359) |
| 15 | 201% | 287% | 39 (29) | 205 (278) |
