The Muncie SH6S-F7007-F3CX (also referenced as SH6SF7007F3CX) is an air-shift-only power take-off from Muncie's SH Series, engineered to bridge the gap between the TG and 82 Series for high-torque truck applications. It mounts via a 6-bolt cast iron housing and uses an integral air shift design with no exposed air cylinder. Five speed ratios and 12 output shaft options allow it to pair with a wide range of hydraulic pump types, while 17 available input gear sets cover most popular transmission configurations. At the 05 and 07 speed ratios, the series is rated at 400 ft-lb intermittent torque and 280 ft-lb continuous torque at 1,000 RPM. Call us to confirm proper fit for your transmission and pump setup.
Features
Integral air shift design with no exposed air cylinder
6-bolt cast iron housing for secure, straightforward mounting
5 speed ratios to suit varied application requirements
12 output shaft options compatible with most popular hydraulic pump types
17 input gear sets cover most popular transmission configurations
Up to 400 ft-lb intermittent torque and 280 ft-lb continuous torque at 1,000 RPM (speed ratios 05 and 07)
Tech Specs
- Housing: 6-bolt cast iron
- Shift type: Air shift (integral, no exposed air cylinder)
- Speed ratios available: 5
- Output shaft options: 12
- Input gear sets: 17
- Dimensions (H x W x L): 11.63 in. x 13.38 in. x 15.63 in.
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
