This complete axle kingpin repair kit fits Mack and Navistar steering axles and supplies everything needed for one side's kingpin overhaul, including two king pins, upper thrust bearings, upper cap assemblies, lower pin caps, a lower bushing pair, upper and lower seals, a grease fitting, retaining nuts, and an O-ring. The kingpins pivotally connect the steering knuckle to the front axle beam, letting the wheels turn while carrying the front-end load. Sized 60mm x 40mm diameter by 228mm length with an M40 x 1.5 thread.
Interchanges:
- Mack 301SQ53
- Navistar FAK5459
Features
King pin diameter: 60mm x 40mm
King pin length: 228mm
Thread size: M40 x 1.5
Includes 2 king pins, 2 upper thrust bearings, 2 upper cap assemblies
Includes lower pin caps, lower bushings, upper and lower seals, grease fitting, nuts, and O-ring
Tech Specs
- Diameter: 60mm x 40mm
- Length: 228mm
- Thread: M40 x 1.5
- Kit contents: 2x King Pin (ASP-9851), 2x Upper Thrust Bearing (ATB-9862), 2x Upper Cap Assembly (ACP-9857), 2x Lower Pin Cap (803190), 1x Lower Pin Cap (803190-001), 1x O-Ring (ACP-9858-002), 1x Grease Fitting (FGF-0173), 2x Nut (ANU-0438), 2x Lower Bushing (ABG-9855), 2x Seal (AGS-9853), 2x Lower Seal (AGS-9854)
