The Chelsea 489 Series Power Take-Off 489KLAHX-A3XD or 489KLAHXA3XD is an 8-bolt mechanical shift PTO designed to mount directly to most manual transmissions, including Eaton Fuller, Mack, and Tremec, without an adapter plate. The integral one-piece cast iron housing eliminates a potential leak path and delivers the same 250 lb-ft torque capacity as the Chelsea 442 Series. Tapered bearings replace needle bearings for greater load capacity. The 489 Series supports wire/cable mechanical shift, with intermittent torque rated at 201 to 300 lb-ft and output power of 46 to 55 HP. Shaft power is rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. A genuine Chelsea part, available from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
8-Bolt direct-mount housing fits most manual transmissions without an adapter plate
One-piece cast iron housing eliminates adapter plate leak path
Intermittent torque rating: 201 to 300 lb-ft (301 to 400 Nm)
Shaft output: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Wire/cable mechanical shift type
Tapered bearings for greater load capacity over needle-bearing designs
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Intermittent Torque: 201 to 300 lb-ft (301 to 400 Nm)
- Output Power: 46 to 55 HP (31 to 40 kW)
- Shaft Power: 24 HP at 500 RPM; 48 HP at 1,000 RPM
- Output Shaft Type: Round Shaft, 1-1/4 in. Key
- Housing Material: One-piece cast iron
- Compatible Transmissions: Eaton Fuller, Mack, Tremec (8-bolt PTO aperture)
- Product Series: Chelsea 489
