The Chelsea 489ZHDAX-V5RK or 489ZHDAXV5RK is a 489 Series Power Take-Off built for 8-bolt manual transmission openings found on Eaton Fuller, Mack, Tremec, and Eaton Endurant gearboxes. The one-piece cast iron housing bolts directly to the transmission without an adapter plate, eliminating a common leak path. This unit uses strong tapered bearings rather than needle bearings for greater load capacity. Shift type is wire/cable mechanical. The 489 Series carries an intermittent torque rating of 201-300 lb-ft and output power of 46-55 HP, with internal parts shared with the Chelsea 442 Series. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission, no adapter plate required
Wire/cable mechanical shift type
Intermittent torque rating: 201-300 lb-ft (301-400 Nm) for the 489 Series
Output power: 46-55 HP (31-40 kW) for the 489 Series
Tapered bearings replace needle bearings for increased load-bearing capability
Internal parts common to the Chelsea 442 Series simplify service and parts sourcing
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Intermittent Torque (Series): 201-300 lb-ft / 301-400 Nm
- Output Power (Series): 46-55 HP / 31-40 kW
- Shaft Power: 24 HP at 500 RPM / 48 HP at 1000 RPM
- Output Shaft Type: Round Shaft, 1-1/4 in. Key
- Lubricant Options: X = No Pressure Lube, P = Pressure Lube
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec (8-bolt aperture)
- Housing Material: Cast Iron
