The Chelsea 489ZUITX-W3XD or 489ZUITXW3XD is an 8-bolt power take-off from the Chelsea 489 Series, designed to mount directly to 8-bolt manual transmission openings on Eaton Fuller, Mack, Tremec, and similar units. The one-piece cast iron housing eliminates the need for an adapter plate, reducing both mounting time and potential leak paths. This series uses wire/cable mechanical shift and features tapered bearings in place of needle bearings for greater load capacity. Intermittent torque rating for the 489 Series runs 201 to 300 lb-ft. Shaft power is rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. Output is through a 1-1/4 inch round keyed shaft. Call us to confirm proper fit for your application.
Features
8-Bolt direct mount to manual transmission opening, no adapter plate required
Wire/cable mechanical shift
One-piece cast iron housing reduces leak paths
Tapered bearings for greater load-bearing capacity versus needle bearings
Intermittent torque rating: 201 to 300 lb-ft (301 to 400 Nm)
Shaft output: 1-1/4 inch round keyed shaft, 24 HP at 500 RPM / 48 HP at 1,000 RPM
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Housing: One-piece cast iron
- Output Shaft: 1-1/4 inch round with key
- Intermittent Torque: 201 to 300 lb-ft (301 to 400 Nm)
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
- Compatible Transmissions: Eaton Fuller, Mack, Tremec (8-bolt aperture)
- Dimensions (H x W x L): 15 x 12 x 14 in.
