The Chelsea 221XEAKP-M6XD or 221XEAKPM6XD is a 6-bolt power take-off assembly from the 221 Series, built for low-speed, heavy-duty vocational applications including dump trucks, tow and recovery, and aerial equipment. It mounts to Allison, Eaton/Fuller, Volvo/Mack, Hino, and other compatible transmissions. The wire/cable mechanical shift operates a cast iron housing unit with tapered cone output bearings, providing greater load-bearing capability than needle-bearing designs. Output shaft is a 1-1/4" round with keyway. Intermittent torque rating for this series is 250 lb-ft (339 Nm); check application pages for actual torque ratings on this configuration. Shaft power at 1000 RPM reaches 48 HP (36 kW). Call us to confirm proper fit for your application.
Features
6-Bolt mounting, compatible with Allison, Eaton/Fuller, Volvo/Mack, Hino, and other transmissions
Wire/cable mechanical shift type
1-1/4" round output shaft with keyway
Intermittent torque rating: 250 lb-ft / 339 Nm (verify actual rating on application pages)
Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
Greaseable pump shafts to reduce spline fretting and corrosion
Available in standard or low-profile housing
Tech Specs
- Intermittent Torque: 250 lb-ft / 339 Nm (Check Application Pages for Actual Torque Ratings)
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP / 31-40 kW
- Output Shaft Type: 1-1/4" Round with Key
- Transmission Manufacturer: Allison, Eaton/Fuller, Volvo/Mack, Hino, Other
- Mounting Type: 6-Bolt
- Shaft Power: 24 HP (500 RPM), 48 HP (1000 RPM) / 18 kW (500 RPM), 36 kW (1000 RPM)
Additional Information
