The Chelsea 221XLAHX-V3XD or 221XLAHXV3XD is a 6-bolt mounted power take-off from the Chelsea 221 Series, built for low-speed, heavy-duty applications such as dump trucks, tow and recovery rigs, and aerial equipment. Shift type is wire/cable mechanical. The output shaft is a 1-1/4" round with keyway. Intermittent torque rating for the 221 Series is 250 lb-ft (339 Nm); verify actual torque against the application pages for your specific installation. Shaft power is rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. Compatible transmissions include Allison, Eaton/Fuller, Volvo/Mack, Hino, and other manufacturers. The cast iron housing is available in standard or low-profile configurations, and pump shafts are greaseable to resist spline fretting. Call us to confirm proper fit for your application.
Features
6-bolt mounting configuration
Wire/cable mechanical shift type
1-1/4" round output shaft with keyway
Intermittent torque: 250 lb-ft (339 Nm) - check application pages for actual ratings
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Greaseable pump shafts to reduce spline fretting and corrosion
Available in standard or low-profile housing
Tech Specs
- Intermittent Torque: 250 lb-ft (339 Nm) - Check Application Pages for Actual Torque Ratings
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP (31-40 kW)
- Output Shaft Type: 1-1/4" Round with Key
- Transmission Manufacturer: Allison, Eaton/Fuller, Volvo/Mack, Hino, Other
- Mounting Type: 6-Bolt
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM (18 kW at 500 RPM, 36 kW at 1,000 RPM)
Additional Information
