The Chelsea 252DMKUX-B5P42 or 252DMKUXB5P42 is a hydraulic-shift power take-off assembly from the Chelsea 252 Series, designed for Allison and RAM transmission applications. It mounts with a 6-bolt pattern and uses a 1-inch round output shaft with a keyway. Intermittent torque ratings for this series are 120 lb-ft (163 Nm) - check the application pages for the torque rating specific to your installation. Shaft power output reaches 11 HP at 500 RPM and 23 HP at 1000 RPM. The integrated cartridge valve and single-hose connection simplify installation, and the controlled compression interface gasket with weather-tight electrical connectors keep the unit properly sealed in vocational service. Call us to confirm proper fit for your application.
Features
Hydraulic shift operation
6-bolt mounting pattern
1-inch round output shaft with keyway
Intermittent torque: 120 lb-ft (163 Nm) - verify against application pages for your specific install
Shaft power: 11 HP at 500 RPM, 23 HP at 1000 RPM
Single hose connection with integrated cartridge valve
Controlled compression interface gasket and weather-tight electrical connectors
Tech Specs
- Shift Type: Hydraulic
- Mounting Type: 6-Bolt
- Output Shaft Type: 1" Round with Keyway
- Intermittent Torque: 120 lb-ft (163 Nm) - Check Application Pages for Actual Torque Ratings
- Output Power: 25 HP and below, 20 kW and below
- Shaft Power: 11 HP at 500 RPM, 23 HP at 1000 RPM, 9 kW at 500 RPM, 17 kW at 1000 RPM
- Transmission Fitment: Allison, RAM
Additional Information
