The Chelsea 252 Series Power Take-Off Assembly, part number 252GDHVP-B5XB or 252GDHVPB5XB, is a hydraulic-shift, 6-bolt PTO built for Allison 1000/2000/2400 series automatic transmissions and RAM truck applications. Output is delivered through a 1-inch round shaft with keyway. Intermittent torque rating falls in the 101-200 lb-ft range (check application pages for the actual torque figure for your specific install). Shaft power reaches 23 HP at 1000 RPM and 11 HP at 500 RPM. The integrated cartridge valve means only a single hydraulic hose connection is required, cutting installation time. Weather-tight electrical connectors and a Controlled Compression Interface gasket are included as standard. Applications include tow and recovery, dump trucks, tire service trucks, and aerial equipment. Call us to confirm proper fit for your transmission and chassis configuration.
Features
Hydraulic shift operation with single hose connection and integrated cartridge valve
6-bolt mounting for Allison 1000/2000/2400 series and RAM truck transmissions
1-inch round output shaft with keyway
Intermittent torque rating: 101-200 lb-ft (verify actual rating on application pages)
Shaft power: 11 HP at 500 RPM, 23 HP at 1000 RPM
Controlled Compression Interface Gasket and weather-tight electrical connectors included
Tech Specs
- Shift Type: Hydraulic
- Mounting Type: 6-Bolt
- Output Shaft Type: 1" Round with Key
- Transmission Fitment: Allison 1000/2000/2400 Series, RAM
- Intermittent Torque: 101-200 lb-ft / 101-200 Nm (check application pages for actual torque rating)
- Output Power: 25 HP and below / 20 kW and below
- Shaft Power: 11 HP at 500 RPM, 23 HP at 1000 RPM / 9 kW at 500 RPM, 17 kW at 1000 RPM
Additional Information
