The Chelsea 252GDHVX-B5XE (also written 252GDHVXB5XE) is a hydraulic-shift power take-off assembly built for Allison and RAM transmission applications. It mounts via a 6-bolt pattern and drives through a 1-inch round output shaft with keyway. Intermittent torque rating is 120 lb-ft (163 Nm); check Chelsea application pages for actual torque ratings for your specific installation. Shaft output is rated at 11 HP at 500 RPM and 23 HP at 1,000 RPM. A single hose connection with integrated cartridge valve simplifies hydraulic plumbing, while the controlled compression interface gasket and weather-tight electrical connectors suit demanding duty cycles. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your transmission and chassis.
Features
Hydraulic shift operation
6-bolt mounting pattern for Allison and RAM transmissions
1" round output shaft with keyway
Intermittent torque: 120 lb-ft (163 Nm) - verify against Chelsea application pages for your application
Shaft output: 11 HP at 500 RPM, 23 HP at 1,000 RPM
Single hose connection with integrated cartridge valve; weather-tight electrical connectors; controlled compression interface gasket
Tech Specs
- Shift Type: Hydraulic
- Mounting Type: 6-Bolt
- Transmission Manufacturer: Allison, RAM
- Output Shaft Type: 1" Round with Key
- Intermittent Torque: 120 lb-ft (163 Nm) - Check Application Pages for Actual Torque Ratings
- Shaft Power: 500 RPM: 11 HP (9 kW), 1000 RPM: 23 HP (17 kW)
- Output Power: 25 HP and below (20 kW and below)
Additional Information
