The Chelsea 252 Series Power Take-Off Assembly, part number 252RDKUX-B51462 or 252RDKUXB51462, is a hydraulic-shift PTO built for Allison 1000/2000/2400 series and RAM automatic transmissions. It mounts via a 6-bolt pattern and delivers output through a 1-inch round shaft with keyway. Intermittent torque is rated at 120 lb-ft (163 Nm); check application pages for torque ratings specific to your installation. Shaft power runs 11 HP at 500 RPM and 23 HP at 1000 RPM. The integrated cartridge valve and single-hose connection simplify installation significantly compared to remote-solenoid designs. The housing is sized to pass through a floor access panel without dropping the exhaust system. Sold by Pro Gear and Transmission. Call us to confirm fit for your specific chassis.
Features
Hydraulic shift operation
6-bolt mounting pattern
1-inch round output shaft with keyway
Intermittent torque rated at 120 lb-ft (163 Nm) - verify against application pages for your installation
Shaft power: 11 HP at 500 RPM, 23 HP at 1000 RPM
Single hose connection with integrated cartridge valve eliminates remote solenoid routing
Controlled Compression Interface Gasket and weather-tight electrical connectors
Tech Specs
- Shift Type: Hydraulic
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-inch Round with Keyway
- Intermittent Torque: 120 lb-ft (163 Nm) - check application pages for actual torque ratings
- Output Power: 25 HP and below, 20 kW and below
- Shaft Power: 11 HP at 500 RPM, 23 HP at 1000 RPM (9 kW at 500 RPM, 17 kW at 1000 RPM)
- Transmission Fitment: Allison 1000/2000/2400 Series, RAM automatic transmissions
- Continuous Operation: Yes, with 30% de-rating
Additional Information
