The Chelsea 282 Series Power Take-Off Assembly, part number 282GTAJX-V3BD or 282GTAJXV3BD, is an 8-bolt medium-duty hot-shift PTO compatible with Allison, Eaton/Fuller, Volvo/Mack, and other transmission manufacturers. Shift is pneumatic or PowerShift (pneumatic/hydraulic), with an integral air valve included. The output shaft is a 1-1/4" round shaft with a 5/16" key. Intermittent torque capacity runs 201-300 lb-ft (401-500 Nm); the series carries a continuous-duty torque rating up to 300 lb-ft - confirm actual ratings on the application pages for your specific installation. Shaft power output is 29 HP at 500 RPM and 57 HP at 1000 RPM. Typical markets include aerial, towing and recovery, construction equipment, water trucks, and fuel oil delivery. Call us to confirm proper fit for your application.
Features
8-Bolt mounting configuration compatible with Allison, Eaton/Fuller, Volvo/Mack, and other transmissions
Pneumatic or PowerShift (pneumatic/hydraulic) shift with integral air valve included
1-1/4" round output shaft with 5/16" key
Intermittent torque: 201-300 lb-ft (401-500 Nm); continuous-duty rated up to 300 lb-ft (check application pages for actual ratings)
Shaft power: 29 HP at 500 RPM, 57 HP at 1000 RPM
Rotatable flanges and optional Wet-Spline and Smart Start configurations available in the 282 Series
Tech Specs
- Intermittent Torque: 201-300 lb-ft (401-500 Nm)
- Continuous Torque: Up to 300 lb-ft / 407 Nm (check application pages for actual torque ratings)
- Output Shaft Type: 1-1/4" Round with 5/16" Key
- Shift Type: Pneumatic or PowerShift (Pneumatic/Hydraulic)
- Mounting Type: 8-Bolt
- Compatible Transmissions: Allison, Eaton/Fuller, Volvo/Mack, Other
- Output Power: 56+ HP (41-50 kW)
- Shaft Power: 29 HP at 500 RPM / 57 HP at 1000 RPM (21 kW at 500 RPM / 43 kW at 1000 RPM)
Additional Information
Parts Manual: Chelsea 282 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
