The Chelsea 442 Series Power Take-Off, part number 442XXBAX-W5XJ or 442XXBAXW5XJ, is a 6-bolt mounting PTO built for light-to-medium duty vocational applications including dump trucks, tow trucks, and service trucks. This unit runs an air shift actuator and a 0.391:1 gear ratio with a 1-1/4" round standard output shaft. Mounting uses standard metric studs. No pressure lube is required on this configuration. The cast iron housing and tapered cone bearings on the output shaft give the 442 Series its torque capacity, rated at an intermittent torque of 250 lb-ft (339 Nm) for the series. Output power for the series reaches up to 48 HP at 1,000 RPM. Call us to confirm proper fit for your application.
Features
Air shift actuation
Gear ratio: 0.391:1
1-1/4" round standard output shaft
Standard mount with metric studs, 6-bolt pattern
No pressure lube required
Cast iron housing with tapered cone bearings on output shaft
Low-profile shift cover
Rotatable output flanges for improved clearance
Greaseable output shafts
Tech Specs
- Product Series: 442
- Input Gear Designator: AH
- Gear Ratio: 0.391:1
- Mounting Option: Standard Mount with Metric Studs (6-bolt)
- Shift Type: Air Shift
- Output Option: 1-1/4" Round Standard Shaft
- Assembly: 3
- Lubricant: No Pressure Lube
- Series Intermittent Torque Rating: 250 lb-ft (339 Nm) - check application pages for actual torque ratings
- Series Output Power: up to 48 HP at 1,000 RPM
