The Chelsea 447 Series Power Take-Off Assembly, part number 447KSESX-W5RB or 447KSESXW5RB, is a 6-bolt mount PTO with wire/cable mechanical shift and a rotatable SAE B 4-bolt flange with a 7/8" 13-tooth SAE B shaft. The 447 Series uses a one-piece input gear with a space between its two sets of gear teeth, a design that eliminates interference problems inside the transmission PTO opening on a wide variety of transmissions. Tapered bearings replace needle bearings for greater load-bearing capability. The series is compatible with Eaton/Fuller, ZF, and other transmission manufacturers. Shaft power output is rated at 21 HP at 500 RPM and 43 HP at 1,000 RPM. Intermittent torque range is 201-300 lb-ft; check the Chelsea application pages for the actual torque rating for your specific installation. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
6-bolt mounting, no adapter plate required for most installations
Wire/cable mechanical shift
Rotatable SAE B 4-bolt flange with a 7/8" 13-tooth SAE B shaft
Shaft power: 21 HP at 500 RPM, 43 HP at 1,000 RPM
Intermittent torque: 201-300 lb-ft (check application pages for actual rating)
One-piece input gear design eliminates interference inside the transmission PTO opening
Compatible with Eaton/Fuller, ZF, and other transmission manufacturers
Tech Specs
- Intermittent Torque: 201-300 lb-ft / 301-400 Nm (check application pages for actual torque rating)
- Mounting Option: Standard Mount without Stud Kit (K)
- Gear Ratio Code: S
- Input Gear Designator: ES
- Lube Option: No Pressure Lube (X)
- Shift Option: Cable (Wire) Shift (W)
- Assembly Arrangement: 5
- Output Option: Rotatable SAE B 4-Bolt Flange, SAE B Shaft (7/8" 13T) (RB)
- Output Power: 36-45 HP / 31-40 kW
- Mounting Type: 6-Bolt
- Shaft Power: 21 HP at 500 RPM, 43 HP at 1,000 RPM (16 kW at 500 RPM, 32 kW at 1,000 RPM)
- Transmission Compatibility: Eaton/Fuller, ZF, and other manufacturers
