The Chelsea 447 Series Power Take-Off Assembly, part number 447KUESX-A3RA or 447KUESXA3RA, is a 6-bolt mounted PTO built around a one-piece input gear with a space between two sets of gear teeth. That design specifically eliminates gear interference inside the transmission PTO aperture, a common fitment problem on a wide range of transmissions including Eaton/Fuller, ZF, and other manufacturers. Shift is air shift. The output is a rotatable SAE B 2-bolt flange with a 7/8" 13-tooth SAE B shaft. Output power ranges from 36 to 45 HP (31-40 kW), with shaft power rated at 21 HP at 500 RPM and 43 HP at 1,000 RPM. Intermittent torque is rated up to 225 lb-ft (305 Nm); check the Chelsea application pages for your specific torque rating. Tapered bearings replace needle bearings for greater load-bearing capability. No adapter plate is required for installation. Call us to confirm proper fit for your application.
Features
6-bolt mounting, no adapter plate required
Air shift
Rotatable SAE B 2-bolt flange with a 7/8" 13-tooth SAE B shaft
Intermittent torque up to 225 lb-ft / 305 Nm (verify rating on Chelsea application pages)
Shaft power: 21 HP at 500 RPM, 43 HP at 1,000 RPM
One-piece input gear design eliminates internal transmission interference problems
Compatible with Eaton/Fuller, ZF, and other transmission manufacturers
Tech Specs
- Intermittent Torque: 201-300 lb-ft (301-400 Nm); 225 lb-ft / 305 Nm - check application pages for actual rating
- Continuous Torque: De-rate intermittent rating by 30% - check application pages for actual rating
- Mounting Option: Standard Mount without Stud Kit (K)
- Gear Ratio Code: U
- Input Gear Designator: ES
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: Rotatable SAE B 2-Bolt Flange, SAE B Shaft (7/8" 13T) (RA)
- Output Power: 36-45 HP (31-40 kW)
- Shaft Power: 21 HP at 500 RPM, 43 HP at 1,000 RPM (16 kW at 500 RPM, 32 kW at 1,000 RPM)
- Mounting Type: 6-Bolt
- Transmission Compatibility: Eaton/Fuller, ZF, Other
