The Chelsea 447KUESX-A3XQ or 447KUESXA3XQ is a 6-bolt power take-off assembly from the Chelsea 447 Series, engineered to eliminate interference problems inside the transmission PTO opening. It uses a one-piece input gear with a space between the two sets of gear teeth, which prevents adjacent gear interference found on some transmission apertures. The unit mounts to Eaton/Fuller, ZF, and other compatible transmissions without an adapter plate. Output is through an SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft. Shift is air shift. Intermittent torque rating for the 447 Series runs 201-300 lb-ft; confirm actual torque for your specific application before ordering. Call us to verify proper fit for your chassis and transmission.
Features
6-bolt mounting, compatible with Eaton/Fuller, ZF, and other transmissions - no adapter plate required
Air shift type
SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft, rotated 90 degrees
Intermittent torque: 201-300 lb-ft (305 Nm series range); check application pages for actual torque rating
Shaft power: 21 HP at 500 RPM, 43 HP at 1000 RPM
One-piece input gear design eliminates adjacent gear interference inside the PTO opening
Tech Specs
- Intermittent Torque: 201-300 lb-ft / 301-400 Nm (225 lb-ft / 305 Nm - check application pages for actual torque rating)
- Continuous Torque: De-rate intermittent torque rating 30% (check application pages for actual torque rating)
- Mounting Option: Standard Mount without Stud Kit (K)
- Gear Ratio Code: U
- Input Gear Designator: ES
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: SAE B 2 or 4-Bolt Flange, SAE B Shaft (7/8" 13T), Rotated 90 Degrees (XQ)
- Output Power: 36-45 HP / 31-40 kW
- Shaft Power: 21 HP (500 RPM) / 43 HP (1000 RPM) | 16 kW (500 RPM) / 32 kW (1000 RPM)
- Mounting Type: 6-Bolt
- Compatible Transmission Manufacturers: Eaton/Fuller, ZF, Other
