The Chelsea 447 Series Power Take-Off Assembly, part number 447KWESX-A3RA or 447KWESXA3RA, is a 6-bolt PTO built around a one-piece input gear with a gap between its two sets of gear teeth. That design eliminates interference problems inside the transmission PTO opening, a common fitment challenge on a wide variety of transmissions including Eaton/Fuller and ZF units. Shift is air shift. The rotatable SAE B 2-bolt flange output has a 7/8" 13-tooth SAE B shaft. Output power spans 36-45 HP (31-40 kW), with shaft power rated at 21 HP at 500 RPM and 43 HP at 1,000 RPM. Intermittent torque runs 201-300 lb-ft; check application pages for actual torque ratings on your specific installation. No adapter plate is required for most applications. Call us to confirm proper fit for your truck and transmission.
Features
6-bolt mounting, compatible with Eaton/Fuller, ZF, and other transmission makes
Air shift
Rotatable SAE B 2-bolt flange output with a 7/8" 13-tooth SAE B shaft
One-piece input gear design eliminates interference inside the transmission PTO opening
No adapter plate required for most installations
Intermittent torque rating 201-300 lb-ft (301-400 Nm); verify actual torque on application pages
Tech Specs
- Intermittent Torque: 201-300 lb-ft / 301-400 Nm (Check Application Pages for Actual Torque Ratings; 225 lb-ft / 305 Nm listed as reference value)
- Continuous Torque: De-rate intermittent torque rating by 30% (Check Application Pages for Actual Torque Ratings)
- Mounting Option: Standard Mount without Stud Kit (K)
- Gear Ratio Code: W
- Input Gear Designator: ES
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: Rotatable SAE B 2-Bolt Flange, SAE B Shaft (7/8" 13T) (RA)
- Output Power: 36-45 HP / 31-40 kW
- Shaft Power: 21 HP at 500 RPM, 43 HP at 1,000 RPM (16 kW at 500 RPM, 32 kW at 1,000 RPM)
- Mounting Type: 6-Bolt
- Compatible Transmission Manufacturers: Eaton/Fuller, ZF, Other
