The Chelsea 447KWESX-S3XK or 447KWESXS3XK is a 6-bolt Power Take-Off assembly from the Chelsea 447 Series, engineered with a one-piece input gear that spaces the two sets of gear teeth apart to eliminate interference inside the transmission PTO opening. It uses air shift actuation and delivers up to 43 HP (32 kW) at 1,000 RPM, with an intermittent torque rating in the 201-300 lb-ft range (check application pages for actual torque ratings). The output is an SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft, with a keyed variant also available in the series. Strong tapered bearings replace the needle bearings found on earlier designs for improved load capacity. Compatible with Eaton/Fuller, ZF, and a range of other transmission manufacturers. Call us to confirm proper fit for your application.
Features
6-bolt mounting, no adapter plate required for most applications
Air shift with a PTO/dump pump combo valve
SAE B 2 or 4-bolt flange with a 7/8" 13-tooth SAE B shaft
Shaft power: 21 HP (16 kW) at 500 RPM, 43 HP (32 kW) at 1,000 RPM
Intermittent torque: 201-300 lb-ft / 301-400 Nm (verify actual rating on application pages)
One-piece input gear design eliminates PTO-opening interference on compatible Eaton/Fuller, ZF, and other transmissions
Tapered bearings for increased load-bearing capability over needle-bearing designs
Tech Specs
- Mounting Type: 6-Bolt
- Mounting Option: Standard Mount without Stud Kit (K)
- Gear Ratio Code: W
- Input Gear Designator: ES
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift with PTO/Dump Pump Combo Valve (with Kick-Out, with Neutral Spring Return) (S)
- Assembly Arrangement: 3
- Output Option: SAE B 2 or 4-Bolt Flange, SAE B Shaft (7/8" 13T) (XK)
- Transmission Compatibility: Eaton/Fuller, ZF, Other
- Intermittent Torque: 201-300 lb-ft / 301-400 Nm (check application pages for actual torque ratings)
- Output Power: 36-45 HP / 31-40 kW
- Shaft Power at 500 RPM: 21 HP / 16 kW
- Shaft Power at 1000 RPM: 43 HP / 32 kW
