The Chelsea 489ZFDAX-V5XD or 489ZFDAXV5XD is a 489 Series Power Take-Off assembly built for manual transmissions with an 8-bolt PTO mounting aperture, including Eaton/Fuller, Volvo/Mack, and Tremec. The integral one-piece cast iron housing bolts directly to the transmission opening, eliminating the adapter plate and reducing potential leak paths. Output shaft is a 1-1/4" round with key. The wire/cable mechanical shift type delivers an intermittent torque rating of 250 lb-ft (339 Nm) for the series, with shaft power of 24 HP at 500 RPM and 48 HP at 1,000 RPM. Strong tapered bearings replace needle bearings for greater load-bearing capability. Internal parts are common to the Chelsea 442 Series. Call us to confirm proper fit for your application.
Features
8-Bolt integral cast iron housing mounts directly to the transmission opening with no adapter plate needed
Wire/cable mechanical shift type; electric-over-air shift option also available
1-1/4" round output shaft with key
Intermittent torque rating: 250 lb-ft (339 Nm); shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Kit-style design simplifies field service; internal parts common to the Chelsea 442 Series
Greaseable output options available to reduce pump shaft spline wear and corrosion
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round with Key
- INTERMITTENT TORQUE: 250 lb-ft / 339 Nm (Check Application Pages for Actual Torque Ratings)
- OUTPUT POWER: 46-55 HP / 31-40 kW
- SHAFT POWER: 24 HP at 500 RPM, 48 HP at 1,000 RPM (18 kW at 500 RPM, 36 kW at 1,000 RPM)
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt aperture
- LUBRICANT: X = No Pressure Lube, P = Pressure Lube
Additional Information
