The Chelsea 489 Series Power Take-Off Assembly, part number 489ZQDAX-A3SQ or 489ZQDAXA3SQ, mounts directly to an 8-bolt transmission opening with a one-piece cast iron housing that eliminates the need for an adapter plate, reducing potential leak paths. The 489 Series delivers intermittent torque in the 201-300 lb-ft range and shaft power of 24 HP at 500 RPM and 48 HP at 1,000 RPM. This unit uses a wire/cable mechanical shift and carries a 1-1/4" round output shaft. Compatible transmissions include Eaton/Fuller, Mack, and Tremec manual units. Tapered bearings replace needle bearings for improved load capacity. Internal parts are common to the Chelsea 442 Series, and greaseable output options help resist spline fretting and corrosion. Call us to confirm proper fit for your specific transmission.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening, no adapter plate required
Wire/cable mechanical shift with electric-over-air shift option available within the 489 Series
Intermittent torque rating: 201-300 lb-ft; shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
1-1/4" round output shaft; greaseable output options to reduce spline fretting and corrosion
Tapered bearings for greater load capacity compared to needle-bearing designs
Kit-style construction with internal parts common to the Chelsea 442 Series simplifies service
Tech Specs
- INTERMITTENT TORQUE: 201-300 lb-ft (301-400 Nm) - Check Application Pages for Actual Torque Ratings
- CONTINUOUS TORQUE: De-rate intermittent torque rating by 30% - Check Application Pages for Actual Torque Ratings
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- OUTPUT SHAFT TYPE: 1-1/4" Round; 1-1/4" Round with Key
- MOUNTING TYPE: 8-Bolt
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Mack, Tremec, and other manual transmissions with 8-bolt PTO aperture
- PRODUCT SERIES: 489
- LUBRICANT: X = No Pressure Lube; P = Pressure Lube
Additional Information
