The Dana Spicer SPL170 Coupling Shaft, part number 10089427-1290MR or 100894271290MR, is a welded steel driveline coupling shaft built to SPL170 series specifications. The steel tube measures 126.0 mm in diameter with a 3.0 mm wall (4.9606 in. x 0.1181 in.) and a tube length of 1290.0 mm (50.7874 in.). Collapsed center-line yoke-to-yoke measurement is 1595.3 mm (62.8071 in.), and center-line yoke to center-line bearing is 1435.3 mm (56.5079 in.). The assembly accommodates a 25-degree joint angle and ships with one ST/HR-style universal joint already included. No slip assembly; CV joints are not part of this shaft. Call us to confirm proper fit for your application.
Features
Dana Spicer SPL170 series coupling shaft
Steel tube: 126.0 mm diameter x 3.0 mm wall (4.9606 in. x 0.1181 in.)
Tube length: 1290.0 mm (50.7874 in.)
Collapsed CL yoke-to-yoke: 1595.3 mm (62.8071 in.)
25-degree joint angle; one ST/HR universal joint included in assembly
Welded assembly; no slip assembly; CV joints not included
Tech Specs
- Series SPL170
- Shaft Material Steel
- Part Type Coupling Shaft
- Tube Size 126.0 mm x 3.0 mm (4.9606 in. x 0.1181 in.)
- Tube Length 1290.0 mm (50.7874 in.)
- CL Yoke to CL Yoke (Collapsed) 1595.3 mm (62.8071 in.)
- CL Yoke to CL Bearing 1435.3 mm (56.5079 in.)
- Joint Angle 25 degrees
- Assembly Type Welded
- Universal Joints Included Yes - 1 U-joint (ST/HR style)
- CV Joints Included No
- Slip Assembly No
- Phased No
- VMRS 024002062
