The Dana Spicer SPL100 Coupling Shaft, part number 100CS55001-1240M or 100CS550011240M, is a steel driveline coupling shaft built to SPL100 series specifications. The steel tube measures 4.000 in. diameter with a 48.82 in. tube length (1,240 mm). Maximum slip is 4.33 in. (110 mm), with a mid-slip of 2.17 in. (55 mm). Collapsed center-line yoke to center-line yoke measures 64.32 in. (1,633.7 mm); center-line yoke to end of spline sleeve collapses to 66.48 in. (1,688.7 mm). The shaft is non-phased, carries a 25-degree joint angle rating, and includes a welded flange end. Two universal joints are included. Call us to confirm proper fit for your application.
Features
Dana Spicer SPL100 series driveline coupling shaft
Steel tube: 4.000 in. diameter, 48.82 in. tube length (1,240 mm)
Maximum slip: 4.33 in. (110 mm); mid-slip: 2.17 in. (55 mm)
Collapsed CL yoke to CL yoke: 64.32 in. (1,633.7 mm)
Non-phased; 25-degree joint angle; welded flange end
Two universal joints included; Style 2 U-joint
Tech Specs
- Series: SPL100
- Shaft Material: Steel
- Part Type: Coupling Shaft
- Tube Size: 4.000 in. diameter x 0.0948 in. wall (101.6 mm x 2.41 mm)
- Tube Length: 48.82 in. (1,240 mm)
- Max Slip: 4.33 in. (110 mm)
- Mid Slip: 2.17 in. (55 mm)
- 1/2 Max Slip: 2.17 in. (55 mm)
- CL Yoke to CL Yoke (Collapsed): 64.32 in. (1,633.7 mm)
- CL Yoke to CL Bearing: 53.57 in. (1,360.7 mm)
- CL Yoke to End of Spline Sleeve (Collapsed): 66.48 in. (1,688.7 mm)
- Joint Angle: 25 degrees
- Flange End: Welded
- U-Joint Style: 2
- Universal Joints Included: Yes
- Phased: No
- VMRS: 024002062
