Dana Spicer part 170CS54021C-875MR or 170CS54021C875MR is a welded steel coupling shaft in the SPL170 driveline series. The steel tube measures 126.0 mm x 3.0 mm wall (4.9606 in. x 0.1181 in.) with a tube length of 875.0 mm (34.4488 in.). Center-line yoke to center-line bearing measures 1020.3 mm (40.1693 in.), and the collapsed center-line yoke to center-line yoke dimension is 1180.3 mm (46.4685 in.). The assembly includes one standard/heavy-round (ST/HR) style universal joint, phased at 90 degrees, with a maximum joint angle of 25 degrees. This is a ReadyShaft, non-slip, non-CV configuration. A genuine Dana Spicer part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
SPL170 series welded steel coupling shaft
Tube: 126.0 mm x 3.0 mm wall (4.9606 in. x 0.1181 in.), 875.0 mm (34.4488 in.) long
CL yoke to CL bearing: 1020.3 mm (40.1693 in.)
Collapsed CL yoke to CL yoke: 1180.3 mm (46.4685 in.)
One ST/HR universal joint included, phased 90 degrees, 25-degree joint angle
ReadyShaft configuration, non-slip assembly, no CV joints
Tech Specs
- Series: SPL170
- Shaft Material: Steel
- Tube Length: 34.4488 in. (875.0 mm)
- Tube Size: 4.9606 in. x 0.1181 in. wall (126.0 mm x 3.0 mm)
- CL Yoke to CL Bearing: 40.1693 in. (1020.3 mm)
- CL Yoke to CL Yoke (Collapsed): 46.4685 in. (1180.3 mm)
- No. of Universal Joints Included: 1
- U-Joint Style: ST/HR (Standard / Heavy Round)
- Joint Angle: 25 degrees
- Phased: Yes, 90 degrees
- Slip Assembly: No
- CV Joints Included: No
- Assembly: Welded
- Note: ReadyShaft
