The Dana Spicer SPL250 Coupling Shaft, part number 250CS20002-1060M or 250CS200021060M, is a steel driveline coupling shaft built to SPL250 Lite series specifications. The tube measures 4.6692 in. (118.6 mm) in diameter with a 0.2047 in. (5.2 mm) wall and a tube length of 41.7323 in. (1060 mm). Center-line yoke to center-line bearing distance is 50.2953 in. (1277.5 mm), with a joint angle rating of 25 degrees. The shaft is non-phased and includes a universal joint; the flange connection is welded. This is an SPL Lite series shaft: Dana's technical bulletin JOI-TEC-083 specifies that if either the main drive shaft or the coupling shaft in this system requires replacement, both shafts must be ordered as a complete matched set. Call us to confirm the correct pairing for your application.
Features
SPL250 Lite series driveline coupling shaft
Steel tube: 4.6692 in. (118.6 mm) diameter, 0.2047 in. (5.2 mm) wall thickness
Tube length: 41.7323 in. (1060 mm)
Center-line yoke to center-line bearing: 50.2953 in. (1277.5 mm)
Joint angle: 25 degrees, non-phased
Universal joint included; flange connection is welded
SPL Lite system requirement: main drive shaft and coupling shaft must be replaced as a complete set per Dana technical bulletin JOI-TEC-083
Tech Specs
- Series SPL250 Lite
- Shaft Material Steel
- Part Type Coupling Shaft
- Tube Diameter (IN) 4.6692 in.
- Tube Diameter (MM) 118.6 mm
- Tube Wall Thickness (IN) 0.2047 in.
- Tube Wall Thickness (MM) 5.2 mm
- Tube Length (IN) 41.7323 in.
- Tube Length (MM) 1060 mm
- CL Yoke to CL Bearing (IN) 50.2953 in.
- CL Yoke to CL Bearing (MM) 1277.5 mm
- Joint Angle 25 degrees
- Phased No
- Universal Joint Included Yes
- Flange Connection Welded
- VMRS 024002062
