The Dana 250CS50002-855MR is a welded steel coupling shaft from the SPL250 series, built on a 118.6 x 5.2 mm tube (4.6692 x .2047 in) with an 855 mm (33.6614 in) tube length. It is phased at 90 degrees and includes one ST style universal joint. A coupling shaft links driveline sections and carries torque between them, and it also helps take up some movement and alignment variation as the truck works. This is an SPL lite shaft: if either the main drive shaft or the coupling shaft needs replacing, both shafts in the system must be ordered together as a complete set. A genuine Dana part from Pro Gear and Transmission. Call us to confirm proper fit.
Features
SPL250 series welded steel coupling shaft
Tube size 118.6 x 5.2 mm (4.6692 x .2047 in), tube length 855 mm (33.6614 in)
Phased, 90 degrees, with one ST style universal joint included
Center line of yoke to center line of bearing: 1072.5 mm (42.2244 in)
Center line of yoke to end of spline sleeve: 1149 mm (45.2362 in)
No CV joints and no slip assembly
Tech Specs
- Series SPL250
- Shaft Material Steel
- Invoice Coupling Shaft
- Tube Size (MM) 118.6000 x 5.2000
- Tube Size (IN) 4.6692 x .2047
- Tube Length (MM) 855.0000
- Tube Length (IN) 33.6614
- VMRS 024002062
- Phase (Yes/No) Yes
- Phased - Degrees 90
- CL Yoke To CL Bearing (MM) 1072.5000
- CL Yoke To CL Bearing (IN) 42.2244
- Joint Angle 25
- Unwelded/Welded Assembly Welded
- Universal Joints Included Yes
- No. of Universal Joint Included 1
- U-Joint Style ST
- CL Yoke To End Of Spline Sleeve (MM)-COLL 1149
- CL Yoke To End Of Spline Sleeve (IN)-COLL 45.2362
- CV Joints Included No
- Slip Assembly No
