The Dana SPL250 Coupling Shaft, part number 250CS54020C-860MR or 250CS54020C860MR, is a steel-tube driveline coupling shaft built to SPL250 series specs. The tube measures 5.1181 inches in diameter with a 0.1968-inch wall and a tube length of 33.8583 inches (860 mm). Center-line yoke to center-line yoke collapsed length is 46.4252 inches (1179.2 mm); center-line yoke to center-line bearing measures 39.9724 inches (1015.3 mm). The joint angle is rated at 25 degrees. Installation is welded at the flange face, and a universal joint is included. This shaft runs un-phased (0-degree phase) and does not incorporate a slip assembly. Also listed under the Spicer brand as SI25CS54020C86MR. Call us to confirm proper fit for your application.
Features
SPL250 series driveline coupling shaft
Steel tube: 5.1181 in. OD x 0.1968 in. wall, 33.8583 in. (860 mm) length
Center-line yoke to center-line yoke collapsed: 46.4252 in. (1179.2 mm)
Center-line yoke to center-line bearing: 39.9724 in. (1015.3 mm)
25-degree joint angle, un-phased (0 degrees)
Welded flange-face installation; universal joint included; no slip assembly
Tech Specs
- Series SPL250
- Shaft Material Steel
- Part Type Coupling Shaft
- Tube Size (OD x Wall, IN) 5.1181 x 0.1968
- Tube Size (OD x Wall, MM) 130.0 x 5.0
- Tube Length (IN) 33.8583
- Tube Length (MM) 860.0
- CL Yoke to CL Yoke Collapsed (IN) 46.4252
- CL Yoke to CL Yoke Collapsed (MM) 1179.2
- CL Yoke to CL Bearing (IN) 39.9724
- CL Yoke to CL Bearing (MM) 1015.3
- Joint Angle 25 degrees
- Installation / Flange Face Welded
- Universal Joint Included Yes
- U-Joint Style 1
- Phased No (0 degrees)
- Slip Assembly No
- VMRS Code 024002062
