The Dana Spicer 350CS24006F-1210M or 350CS24006F1210M is an SPL350-series coupling shaft built for heavy-duty driveline applications. The steel tube measures 4.74 x 0.236 inches (120.2 x 6.0 mm) with a tube length of 47.64 inches (1,210.0 mm). Center-line yoke to center-line bearing runs 53.83 inches (1,367.3 mm); collapsed center-line yoke to center-line yoke is 60.52 inches (1,537.2 mm). End 1 is SJ-side and End 2 is TJ-side. One SR/HR-style U-joint is included. The assembly is supplied unwelded, phasing is 0 degrees, and no slip assembly or CV joints are included. Max joint angle is 27 degrees. A genuine Dana Spicer part, sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Dana Spicer SPL350 series coupling shaft
Steel tube: 4.74 x 0.236 in. (120.2 x 6.0 mm), 47.64 in. (1,210.0 mm) tube length
Center-line yoke to center-line bearing: 53.83 in. (1,367.3 mm)
Collapsed CL yoke to CL yoke: 60.52 in. (1,537.2 mm)
One SR/HR-style U-joint included; no CV joints
Unwelded assembly, 0-degree phasing, 27-degree max joint angle
Tech Specs
- Series: SPL350
- Shaft Material: Steel
- Tube Length: 47.6378 in. (1,210.0 mm)
- Tube Size: 4.74 x 0.236 in. (120.2 x 6.0 mm)
- CL Yoke to CL Bearing: 53.8307 in. (1,367.3 mm)
- CL Yoke to CL Yoke (Collapsed): 60.5197 in. (1,537.2 mm)
- CL Yoke to Flange Face (Collapsed): 64.6535 in. (1,642.2 mm)
- End 1 Type: SJ Side
- End 2 Type: TJ Side
- U-Joint Style: SR/HR
- Universal Joints Included: Yes (1)
- CV Joints Included: No
- Slip Assembly: No
- Phased: No (0 degrees)
- Max Joint Angle: 27 degrees
- Unwelded/Welded Assembly: Unwelded
