The Dana SPL350 Series Coupling Shaft, part number 350CS54002F-1355M or 350CS54002F1355M, is a steel driveline coupling shaft built to SPL350 series standards. The steel tube measures 5.5118 inches in diameter with a 0.1968-inch wall thickness and a tube length of 53.3465 inches (1,355 mm). Collapsed centerline-yoke-to-centerline-yoke length is 66.1102 inches (1,679.2 mm), and centerline-yoke to centerline-bearing measures 59.9606 inches (1,523 mm). The shaft is welded to the flange face at installation, is not phased, carries a 27-degree joint angle rating, and includes a universal joint (Style 1). The ISR/HR yoke configuration is specified for the installed centerline-yoke-to-centerline-yoke dimension. Also referenced as Spicer 350CS54002F-1355M. Call us to confirm proper fitment for your application.
Features
Dana SPL350 Series driveline coupling shaft
Steel tube: 5.5118 in. diameter x 0.1968 in. wall thickness (140 mm x 5 mm)
Tube length: 53.3465 in. (1,355 mm)
Collapsed CL yoke to CL yoke: 66.1102 in. (1,679.2 mm)
CL yoke to CL bearing: 59.9606 in. (1,523 mm)
27-degree joint angle; U-joint Style 1 included; welded flange installation; ISR/HR yoke; not phased
Tech Specs
- Series SPL350
- Shaft Material Steel
- Tube Size 5.5118 in. x 0.1968 in. wall (140 mm x 5 mm)
- Tube Length 53.3465 in. (1,355 mm)
- CL Yoke to CL Yoke (Collapsed) 66.1102 in. (1,679.2 mm)
- CL Yoke to CL Bearing 59.9606 in. (1,523 mm)
- Joint Angle 27 degrees
- Installation - CL Yoke to Flange Face Welded
- Installed CL Yoke to CL Yoke Configuration ISR/HR
- U-Joint Style 1
- Universal Joint Included Yes
- Phased No
- Slip Assembly No
- VMRS 024002062
