The Dana Spicer SPL250 series drive shaft, part number 250DS82001-440MR or 250DS82001440MR, is a welded steel driveline assembly built to heavy-duty specifications. The steel tube measures 4.6692 inches in diameter with a wall of 0.2047 inches and a tube length of 17.3228 inches (440 mm). Collapsed center-line-yoke to center-line-yoke length is 25.5118 inches (648 mm); installed length is 27.6772 inches (703 mm). Maximum slip is 4.3307 inches (110 mm). The assembly ships with two U-joints (style SR&ST/ST) and carries a 25-degree joint angle rating. End 2 TJ side cross reference is 250-2-15. This shaft is part of the SPL Lite shaft system, see the important replacement notice in the extended information below before ordering. Call us to confirm proper fit for your application.
Features
Dana Spicer SPL250 series welded steel drive shaft
Tube diameter 4.6692 in. x 0.2047 in. wall (118.6 mm x 5.2 mm)
Tube length 17.3228 in. (440 mm); max slip 4.3307 in. (110 mm)
Collapsed CL-yoke to CL-yoke: 25.5118 in. (648 mm); installed: 27.6772 in. (703 mm)
25-degree joint angle; U-joint style SR&ST/ST
Includes 2 universal joints; End 2 TJ side cross: 250-2-15
Tech Specs
- Series SPL250
- Shaft Material Steel
- Tube Size 4.6692 in. diameter x 0.2047 in. wall (118.6 mm x 5.2 mm)
- Tube Length 17.3228 in. (440 mm)
- Max Slip 4.3307 in. (110 mm)
- Mid Slip 2.1654 in. (55 mm)
- CL Yoke to CL Yoke - Collapsed 25.5118 in. (648 mm)
- CL Yoke to CL Yoke - Installed 27.6772 in. (703 mm)
- CL Yoke to Flange Face - Collapsed 29.0945 in. (739 mm)
- CL Yoke to Flange Face - Installed 31.2598 in. (794 mm)
- CL Yoke to End of Yoke Shaft - Collapsed 39.2126 in. (996 mm)
- Joint Angle 25 degrees
- U-Joint Style SR&ST/ST
- Universal Joints Included Yes - 2 U-joints
- End 2 TJ Side 250-2-15
- CV Joints Included No
- Slip Assembly No
- Phased No
- Assembly Type Welded
- VMRS Code 024000000
