Skip to main content
Dana Driveshaft P/N: 250DS82001F-1150M or 250DS82001F1150M

250DS82001F-1150M Dana Spicer SPL250 Lite Drive Shaft

Dana

Driveshaft (Steel) SPL250 Lite

Listing Price: $2,075.31
Sale Price: $1,301.22
(No reviews yet) Write a Review
Product Code:
SPI250DS82001F1150M
UPC:
00196104220496
Condition:
New
Availability:
Usually Ships in 3 to 5 Business Days
Adding to cart… The item has been added
The Dana Spicer SPL250 Lite steel drive shaft, part number 250DS82001F-1150M or 250DS82001F1150M, is a welded driveshaft assembly built to SPL250 series specifications. Tube diameter measures 4.6692 inches with a wall thickness of 0.2047 inches and a tube length of 45.2756 inches (1150 mm). The shaft ships with 2 universal joints included; the U-joint style is SR&ST/ST. Collapsed centerline yoke-to-yoke distance is 53.4646 inches, with a maximum slip of 4.3307 inches. Joint angle is rated at 25 degrees. This is not a phased shaft. As an SPL Lite shaft, if either the main drive shaft or the coupling shaft in the system requires replacement, both shafts must be ordered as a complete set. See Dana Technical Bulletin JOI-TEC-083 for full details. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.

Features

Dana Spicer SPL250 Lite series welded steel driveshaft
Tube size: 4.6692 in. diameter x 0.2047 in. wall (118.6 mm x 5.2 mm)
Tube length: 45.2756 in. (1150 mm)
Maximum slip: 4.3307 in. (110 mm)
Includes 2 universal joints, U-joint style SR&ST/ST
Joint angle: 25 degrees; not phased
SPL Lite shaft - must be replaced as a complete set with the paired coupling shaft; reference Dana Technical Bulletin JOI-TEC-083

Tech Specs

  • Series: SPL250 Lite
  • Shaft Material: Steel
  • Assembly Type: Welded
  • Tube Diameter x Wall Thickness: 4.6692 in. x 0.2047 in. (118.6 mm x 5.2 mm)
  • Tube Length: 45.2756 in. (1150 mm)
  • Max Slip: 4.3307 in. (110 mm)
  • Mid Slip: 2.1654 in. (55 mm)
  • 1/2 Max Slip: 2.1654 in. (55 mm)
  • CL Yoke to CL Yoke (Collapsed): 53.4646 in. (1358 mm)
  • CL Yoke to CL Yoke (Installed): 59.2126 in. (1504 mm)
  • CL Yoke to End of Yoke Shaft (Collapsed): 67.1654 in. (1706 mm)
  • CL Yoke to Flange Face (Collapsed): 57.0472 in. (1449 mm)
  • CL Yoke to Flange Face (Installed): 59.2126 in. (see note)
  • CL Yoke to End of Spline Sleeve (Collapsed): 55.6299 in. (1413 mm)
  • Universal Joints Included: Yes
  • Number of U-Joints: 2
  • U-Joint Style: SR&ST/ST
  • Joint Angle: 25 degrees
  • Phased: No
  • Slip Assembly: No
  • VMRS Code: 024000000

Additional Information

IMPORTANT - SPL LITE SHAFT: If either the main drive shaft or the coupling shaft in this system requires replacement, both shafts must be ordered as a complete set. Ordering a single shaft alone is not sufficient. Refer to Dana Technical Bulletin JOI-TEC-083 for complete instructions.
!
Call Us Now!