The Dana Spicer SPL350 series driveshaft, part number 350DS55002F-680M or 350DS55002F680M, is a steel-tube driveline assembly built to SPL350 series specifications. The tube measures 140.0 mm (5.5118 in.) in diameter with a 5.0 mm (0.197 in.) wall thickness and a tube length of 680.0 mm (26.77 in.). Center-line-to-center-line collapsed length is 1,101.0 mm (43.35 in.); installed length is 1,156.0 mm (45.51 in.). Maximum slip travel is 110.0 mm (4.33 in.). The assembly ships unwelded and includes two SR-style universal joints. Joint angle is 27 degrees; phasing is 0 degrees. No CV joints are included. Call us to confirm proper fit for your application.
Features
SPL350 series driveshaft, part number 350DS55002F-680M or 350DS55002F680M
Steel tube: 140.0 mm (5.5118 in.) diameter x 5.0 mm (0.197 in.) wall
Tube length: 680.0 mm (26.77 in.); collapsed C/L-to-C/L: 1,101.0 mm (43.35 in.)
Installed C/L-to-C/L length: 1,156.0 mm (45.51 in.)
Maximum slip: 110.0 mm (4.33 in.); joint angle 27 degrees, phased 0 degrees
Includes two SR-style universal joints; ships as an unwelded assembly
Tech Specs
- Series: SPL350
- Shaft Material: Steel
- Tube Size: 140.0 mm x 5.0 mm (5.5118 in. x 0.197 in.)
- Tube Length: 680.0 mm (26.77 in.)
- C/L Yoke to C/L Yoke - Collapsed: 1,101.0 mm (43.35 in.)
- C/L Yoke to C/L Yoke - Installed: 1,156.0 mm (45.51 in.)
- C/L Yoke to End of Spline Sleeve - Collapsed: 1,156.0 mm (45.51 in.)
- Maximum Slip: 110.0 mm (4.33 in.)
- Mid Slip: 55.0 mm (2.165 in.)
- 1/2 Max Slip: 55.0 mm (2.165 in.)
- Joint Angle: 27 degrees
- Phased: No (0 degrees)
- U-Joint Style: SR
- Number of Universal Joints Included: 2
- CV Joints Included: No
- Slip Assembly: No
- Unwelded/Welded Assembly: Unwelded
