The Dana 2020707 is a hypoid gear set, ring and pinion, with a 4.88 gear ratio: a ring gear with 39 teeth paired with a pinion gear with 8 teeth. It is for the front location of a full floating Dana 60 axle. The ring gear measures 10.0787 inches across and mounts with 12 bolts, and the pinion has 28 splines. Both the ring gear and the pinion gear are included; the installation kit, shims and pinion nut are not, so plan those separately. A howl or whine under acceleration usually points to worn ring and pinion teeth or a set-up that is off, which is the usual cue to inspect the gear set. Call us to confirm proper fit. A genuine Dana part from Pro Gear and Transmission.
Features
4.88 gear ratio, ring gear tooth count 39, pinion gear tooth count 8
For a Dana 60 axle, front location, full floating
Ring gear diameter 10.0787 in., 12 ring gear bolts, bolt thread .500-20
Pinion spline count 28
Ring gear and pinion gear included; installation kit, shims and pinion nut not included
A howl or whine under acceleration is a common cue to inspect the ring and pinion
Tech Specs
- Axle Model Dana 60
- Gear Ratio 4.88
- Invoice Ring and Pinion
- Ring Teeth Count 39
- Pinion Gear Tooth Quantity 8
- Ring Gear Diameter (In.) 10.0787
- Ring Gear Bolt Qty 12
- On Vehicle Location Front
- Ring Gear Bolt Thread In. .500-20
- Pinion Spline Count 28
- Include Installation Kit No
- Axle Type Full Floating
- Shims Included No
- VMRS 015006013
- Pinion Gear Included Yes
- Ring Gear Included Yes
- Pinion Nut Included No
