The Dana Spicer SPL250 series driveshaft, part number 250DS55003C-1641MR or 250DS55003C1641MR, is a welded steel assembly built to SPL250 series specs. The steel tube measures 5.12 inches in diameter with a .197-inch wall. Tube length is 64.6063 inches (1641.0 mm). Maximum slip is 4.3307 inches (110.0 mm); mid slip is 2.1654 inches (55.0 mm). Center-line yoke to center-line yoke measures 79.6063 inches (2022.0 mm) collapsed and 81.7717 inches (2077.0 mm) installed. The assembly ships with two SPL-style universal joints included. Maximum operating joint angle is 25 degrees. This is a genuine Dana Spicer part, sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
SPL250 series, welded steel driveshaft assembly
Tube size: 5.12 in. diameter x .197 in. wall (130.0 x 5.00 mm)
Tube length: 64.6063 in. (1641.0 mm)
Max slip: 4.3307 in. (110.0 mm); Mid slip: 2.1654 in. (55.0 mm)
C/L yoke to C/L yoke collapsed: 79.6063 in. (2022.0 mm); installed: 81.7717 in. (2077.0 mm)
2 SPL-style universal joints included; maximum joint angle 25 degrees
Tech Specs
- Series SPL250
- Shaft Material Steel
- Tube Size 5.12 in. x .197 in. wall (130.0 x 5.00 mm)
- Tube Length 64.6063 in. (1641.0 mm)
- Max Slip 4.3307 in. (110.0 mm)
- Mid Slip 2.1654 in. (55.0 mm)
- C/L Yoke to C/L Yoke - Collapsed 79.6063 in. (2022.0 mm)
- C/L Yoke to C/L Yoke - Installed 81.7717 in. (2077.0 mm)
- Assembly Welded
- Universal Joints Included Yes - 2 SPL-style u-joints
- Joint Angle 25 degrees
- Phased No
