Dana Spicer driveshaft 817093-4825 or 8170934825 is a welded steel 1810 series drive shaft built for heavy-duty driveline applications. The steel tube measures 4.59 inches in diameter by .180 inch wall thickness (116.7 x 4.57 mm), with a tube length of 48.7813 inches (1,239.04 mm). Collapsed center-line-to-center-line length is 65.797 inches (1,671.24 mm); installed CL-to-CL is 68.297 inches (1,734.74 mm). Maximum slip travel is 5.0 inches (127 mm). The shaft is non-phased and operates at up to a 30-degree joint angle. Two universal joints are included in the assembly. Call us to confirm proper fitment for your application.
Features
1810 series Dana Spicer driveshaft, part number 817093-4825 or 8170934825
Welded steel tube: 4.59 in. diameter x .180 in. wall (116.7 x 4.57 mm)
Tube length: 48.7813 in. (1,239.04 mm)
Collapsed CL-to-CL: 65.797 in. (1,671.24 mm); installed CL-to-CL: 68.297 in. (1,734.74 mm)
Maximum slip: 5.0 in. (127 mm); maximum joint angle: 30 degrees
Includes 2 universal joints; non-phased assembly
Tech Specs
- Series 1810
- Shaft Material Steel
- Tube Size (IN) 4.59 x .180
- Tube Size (MM) 116.7 x 4.57
- Tube Length (IN) 48.7813
- Tube Length (MM) 1,239.04
- Max Slip (IN) 5.0000
- Max Slip (MM) 127.0000
- Mid Slip (IN) 2.5000
- Mid Slip (MM) 63.5000
- CL Yoke To CL Yoke (IN) - Collapsed 65.7970
- CL Yoke To CL Yoke (MM) - Collapsed 1,671.24
- CL Yoke To CL Yoke (IN) - Installed 68.2970
- CL Yoke To CL Yoke (MM) - Installed 1,734.74
- Joint Angle 30 degrees
- Phased No
- Universal Joints Included Yes
- Number of Universal Joints 2
- Assembly Type Welded
