The Dana Spicer 1810 Series Driveshaft, part number 817093-4913 or 8170934913, is a welded steel driveshaft assembly built to 1810-series specifications. The steel tube measures 4.59 in. diameter by 0.180 in. wall thickness, with a tube length of 49.41 in. (1,254.9 mm). Center-line yoke to center-line yoke dimension is 66.42 in. collapsed and 68.92 in. installed. Maximum slip is 5.0 in., with a mid-slip of 2.5 in. The assembly ships with two universal joints included and is not phased, with a maximum joint operating angle of 30 degrees. Call us to confirm proper fit for your application.
Features
1810 Series driveshaft, welded steel assembly
Steel tube: 4.59 in. diameter x 0.180 in. wall thickness
Tube length: 49.41 in. (1,254.9 mm)
CL yoke to CL yoke: 66.42 in. collapsed / 68.92 in. installed
Maximum slip: 5.0 in.; mid-slip: 2.5 in.
Includes 2 universal joints; maximum joint angle 30 degrees; not phased
Tech Specs
- Series 1810
- Shaft Material Steel
- Invoice Drive Shaft
- Tube Size (MM) 116.7 x 4.57
- Max Slip (MM) 127.0000
- Tube Size (IN) 4.59 x .180
- Max Slip (IN) 5.0000
- Tube Length (MM) 1254.9188
- Mid Slip (MM) 63.5000
- Tube Length (IN) 49.4063
- Mid Slip (IN) 2.5000
- CL Yoke To CL Yoke (MM) - COLL 1687.1200
- CL Yoke To CL Yoke (IN) - COLL 66.4220
- Material Steel
- VMRS 024000000
- Phased (Yes/No) No
- Phased - Degrees 0
- Joint Angle 30
- Unwelded/Welded Assembly Welded
- Universal Joints Included Yes
- No. of Universal Joint Included 2
- CL Yoke To CL Yoke (MM)-INST 1750.6200
- CL Yoke To CL Yoke (IN)-INST 68.9220
