The Dana Spicer 817093-5816 or 8170935816 is a welded 1810 series driveshaft built with a steel tube measuring 4.59 inches in diameter at .180 inch wall thickness (116.7 x 4.57 mm). Tube length is 58.5 inches (1485.9 mm). The collapsed center-to-center yoke length is 75.52 inches (1918.1 mm); installed center-to-center is 78.02 inches (1981.6 mm). Maximum slip is 5.0 inches (127.0 mm) with a mid-slip of 2.5 inches (63.5 mm). The assembly includes two universal joints, is not phased, and carries a rated joint angle of 30 degrees. A genuine Dana Spicer part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
1810 series Dana Spicer driveshaft, part number 817093-5816 or 8170935816
Steel tube: 4.59 in. diameter x .180 in. wall (116.7 x 4.57 mm)
Tube length: 58.5 in. (1485.9 mm)
Collapsed CL-to-CL yoke: 75.52 in. (1918.1 mm); installed CL-to-CL: 78.02 in. (1981.6 mm)
Maximum slip: 5.0 in. (127.0 mm); mid-slip: 2.5 in. (63.5 mm)
Welded assembly with 2 universal joints included; joint angle rated at 30 degrees; non-phased
Tech Specs
- Series 1810
- Shaft Material Steel
- Invoice Drive Shaft
- Tube Size (MM) 116.7 x 4.57
- Max Slip (MM) 127.0000
- Tube Size (IN) 4.59 x .180
- Max Slip (IN) 5.0000
- Tube Length (MM) 1485.9000
- Mid Slip (MM) 63.5000
- Tube Length (IN) 58.5000
- Mid Slip (IN) 2.5000
- CL Yoke To CL Yoke (MM) - COLL 1918.1000
- CL Yoke To CL Yoke (IN) - COLL 75.5157
- Material Steel
- VMRS 024000000
- Phased (Yes/No) No
- Phased - Degrees 0
- Joint Angle 30
- Unwelded/Welded Assembly Welded
- Universal Joints Included Yes
- No. of Universal Joint Included 2
- CL Yoke To CL Yoke (MM)-INST 1981.6000
- CL Yoke To CL Yoke (IN)-INST 78.0157
