The Dana Spicer 904848-0700 or 9048480700 is a 1810 series driveshaft built with a 4.50 x .134 in. steel tube (114.30 x 3.40 mm) and a 7 in. tube length. Collapsed center-line-yoke to center-line-yoke measures 24 in. (609.6 mm), and the yoke-to-end-of-spline-sleeve collapsed length is 26.5 in. (673.1 mm). Maximum total slip travel is 5.0 in. (127.0 mm), with a mid-slip and half-max-slip of 2.5 in. (63.5 mm). The joint angle is 30 degrees, phasing is 0 degrees, and U-joint style is 2. Universal joints are included. The flange face end is welded. A genuine Dana Spicer part, sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
1810 series driveshaft, part number 904848-0700 or 9048480700
4.50 x .134 in. (114.30 x 3.40 mm) steel tube, 7 in. tube length
24 in. (609.6 mm) collapsed center-line-yoke to center-line-yoke
5.0 in. (127.0 mm) maximum total slip; 2.5 in. (63.5 mm) half-max slip
30-degree joint angle, 0-degree phasing, U-joint style 2
Universal joints included; flange face end is welded
Tech Specs
- Series: 1810
- Model: 1810
- Tube Size: 4.50 x .134 in. (114.30 x 3.40 mm)
- Tube Length: 7 in. (177.8 mm)
- Shaft Material: Steel
- CL Yoke to CL Yoke - Collapsed: 24 in. (609.6 mm)
- CL Yoke to End of Spline Sleeve - Collapsed: 26.5 in. (673.1 mm)
- CL Yoke to Flange Face - Installed: Welded
- Max Slip: 5.0 in. (127.0 mm)
- 1/2 Max Slip: 2.5 in. (63.5 mm)
- Mid Slip: 2.5 in. (63.5 mm)
- Joint Angle: 30 degrees
- Phased: No (0 degrees)
- U-Joint Style: 2
- Universal Joints Included: Yes
- Slip Assembly: No
