The Dana Spicer 917092-0716 or 9170920716 is a Series 1810 welded steel driveshaft built for heavy-duty driveline applications. The assembly measures 24.51 in. (622.6 mm) center-to-center collapsed and 27.01 in. (686.1 mm) installed, with a 7.5 in. (190.5 mm) tube length. Tube dimensions are 4.59 x 0.180 in. (116.7 x 4.57 mm) steel. Maximum slip is 5.0 in. (127.0 mm) with a mid-slip position of 2.5 in. (63.5 mm). The shaft accommodates a 30-degree joint angle and ships as a welded assembly with two universal joints already included, phased at 0 degrees. Call us to confirm proper fit for your application.
Features
Series 1810 heavy-duty driveshaft
Welded steel assembly with two universal joints included
Collapsed length: 24.51 in. (622.6 mm); installed length: 27.01 in. (686.1 mm)
Tube size: 4.59 x 0.180 in. (116.7 x 4.57 mm) steel
Max slip: 5.0 in. (127.0 mm); mid-slip: 2.5 in. (63.5 mm)
30-degree joint angle; phased 0 degrees (non-phased)
Tech Specs
- Series: 1810
- Shaft Material: Steel
- Tube Length: 7.5 in. (190.5 mm)
- Tube Size: 4.59 x 0.180 in. (116.7 x 4.57 mm)
- Center-to-Center Collapsed: 24.5118 in. (622.6 mm)
- Center-to-Center Installed: 27.0118 in. (686.1 mm)
- Max Slip: 5.0 in. (127.0 mm)
- Mid Slip: 2.5 in. (63.5 mm)
- Joint Angle: 30 degrees
- Phased: No (0 degrees)
- Universal Joints Included: Yes, 2
- Assembly Type: Welded
