The Dana Spicer 917092-1308 or 9170921308 is a welded 1810 Series steel driveshaft built for heavy-duty driveline applications. The steel tube measures 4.59 inches in diameter by .180 inch wall thickness (116.7 x 4.57 mm), with a tube length of 13.25 inches (336.55 mm). Collapsed centerline-to-centerline yoke length is 30.26 inches (768.65 mm); installed centerline-to-centerline measures 32.76 inches (832.15 mm). Maximum slip travel is 5.0 inches (127.0 mm), with a mid-slip of 2.5 inches (63.5 mm). The assembly is non-phased, carries a 30-degree joint angle, and ships with two universal joints included. Call us to confirm proper fit for your application.
Features
1810 Series welded steel driveshaft assembly
Tube size: 4.59 in. diameter x .180 in. wall (116.7 x 4.57 mm)
Tube length: 13.25 in. (336.55 mm)
Collapsed CL-to-CL yoke length: 30.26 in. (768.65 mm); installed: 32.76 in. (832.15 mm)
Maximum slip: 5.0 in. (127.0 mm); mid-slip: 2.5 in. (63.5 mm)
Includes 2 universal joints; non-phased, 30-degree joint angle
Tech Specs
- Series 1810
- Shaft Material Steel
- Invoice Drive Shaft
- Tube Size (MM) 116.7 x 4.57
- Max Slip (MM) 127.0000
- Tube Size (IN) 4.59 x .180
- Max Slip (IN) 5.0000
- Tube Length (MM) 336.5500
- Mid Slip (MM) 63.5000
- Tube Length (IN) 13.2500
- Mid Slip (IN) 2.5000
- CL Yoke To CL Yoke (MM) - COLL 768.6500
- CL Yoke To CL Yoke (IN) - COLL 30.2618
- Material Steel
- VMRS 024000000
- Phased (Yes/No) No
- Phased - Degrees 0
- Joint Angle 30
- Unwelded/Welded Assembly Welded
- Universal Joints Included Yes
- No. of Universal Joint Included 2
- CL Yoke To CL Yoke (MM)-INST 832.1500
- CL Yoke To CL Yoke (IN)-INST 32.7618
